Industrial Automation / Mitsubishi PLC Programming Calgary
Mitsubishi PLC Programming. HMI Installation & Support.
Mitsubishi Electric makes capable hardware. Getting the most out of it takes an integrator with experience. Not one who’s going to figure it out on your clock.
Celtex programs iQ-R and iQ-F systems, supports legacy Q series installations, and troubleshoots Mitsubishi faults at the level your situation requires. If your GOT2000 HMI needs reprogramming, your SSCNET servo axes need tuning, or your Q series processor just threw a fault with no obvious cause, Celtex is the call to make.
Melsec PLC's
Mitsubishi’s current PLC platforms: Melsec iQ-F & iQ-R for new builds, expansions & system upgrades.
Legacy Controllers
Melsec Q and A series legacy PLC platforms. We provide support for programming, troubleshooting & repair.
Calgary Based
Calgary based, Alberta wide coverage for all your Mitsubishi automation & process control needs.
Mitsubishi Electric integrators in calgary
Your System Performance Depends on Us
A Mitsubishi system that hasn’t been properly commissioned doesn’t fail dramatically, it underperforms quietly.
Servo axes that drift. CC-Link devices that drop intermittently. A GX Works3 program written by the last contractor that nobody wants to touch in case something breaks. The system runs, but not the way it should. And nobody quite knows why.
Celtex handles that. And builds new systems that don’t develop those problems in the first place. We have on hand expertise in iQ-R and iQ-F commissioning, SSCNET III/H servo tuning, GOT2000 HMI development, and Q series PLC support.
A team with genuine Mitsubishi field experience.
Services
What Celtex Can Do For You
Whether your Mitsubishi system needs emergency fault diagnosis, a new installation commissioned properly, or legacy PLC system support before a crisis forces your hand: Here’s exactly what we deliver.
01
Stop the fault. Find the cause. Fix it properly.
GX Works3 online fault diagnosis with structured ladder monitoring, device batch monitoring, and event history analysis to find what’s actually wrong and resolve it at the root cause. Not just clear the alarm and hope it doesn’t come back.
GX Works3 · GX Works2 · GX Developer · On-site & Remote
02
New systems commissioned to specification.
iQ-R and iQ-F series PLC installation and commissioning. CPU parameter configuration, CC-Link IE and SSCNET III/H network setup, servo axis initialisation, and full functional acceptance testing before handover. Done right the first time so you’re not calling us back to fix it.
03
Programs your maintenance team can work on.
GX Works3 structured application development with consistent label naming, structured ladder and ST programming, function blocks for repeating logic and inline documentation your team can navigate without needing us in the room every time a modification is required.
04
GOT2000 HMI your operators will actually use.
GT Designer3 HMI development built around operator workflows with screen hierarchy, alarm management with cause and corrective action, recipe handling and trend displays that give your operators real process visibility rather than a wall of tags with no context.
05
Legacy Q and A series PLC's supported or replaced.
GX Works2 and GX Developer program support for Q and A series systems still in service. Fault diagnosis, program backup and recovery, I/O module cross-reference and an honest assessment of what migration to iQ-R involves when the timing is right for your facility.
06
Servo commissioning & MELSERVO tuning.
MR-J4 and MR-J5 servo drive commissioning via MR Configurator2. Gain & PID loop tuning, machine analyser, SSCNET III/H axis configuration with electronic cam and gearing. Drives tuned for your actual load, not left at default parameters and handed over.
07
A technical contact after the project closes.
Celtex offers support arrangements for facilities that need ongoing Mitsubishi expertise. We setup remote GX Works3 access for fault diagnosis and program modifications, preventive maintenance visits, and give you on-site response when the hardware requires someone physically present.
Not sure if your situation fits one of these? Tell us the platform, the problem, and what you need done. We’ll give you a straight answer on whether we can help and what it would involve.
Talk to us →Maximize Your Potential
Celtex is based in Calgary, we perform Mitsubishi PLC programming & integration projects for clients across Alberta and Western Canada.
All electrical work is performed under Canadian Electrical Code jurisdiction, with control panel design, PLC installation, and HMI commissioning completed to CEC standards by licensed technicians with direct Mitsubishi Electric field experience.
Call us to discuss your project.
Mitsubishi PLC Programming / Hardware & software
We Know These Mitsubishi Platforms Inside Out.
Our team has direct experience on the platforms below. We execute projects at the depth the work requires, not the level the manual describes. If your Mitsubishi system isn’t listed, call us anyway. Chances are we’ve seen it.
Flagship platform — current
We Program Mitsubishi iQ-R Series PLC's. The Flagship Platform.
The iQ-R is Mitsubishi’s highest capability controller. A modular base unit that can run a PLC CPU, Motion CPU, Safety CPU, and C intelligent module simultaneously, sharing memory at the backplane level without network overhead. For applications requiring coordinated multi axis motion, integrated safety, and process logic running in parallel the iQ-R is where Mitsubishi’s platform depth makes the biggest difference. Celtex designs, builds and commissions iQ-R systems at the deepest levels. Beyond just the basic PLC functions.
iQ-F Series — Current
Programming High Speed Motion Control.
The iQ-F is a high end compact controller. And like any capable platform, it performs best when it's been configured by someone who knows what they're doing. Celtex programs and commissions iQ-F systems with the same structured discipline we bring to larger platforms. Our services include GX Works3 application development, CC-Link IE Field Basic network setup, integrated positioning configuration, all with full functional acceptance testing before we leave your facility.
Q Series — Legacy
We Support Your Legacy Systems.
Your Q series system is probably still running fine. It may not fail today, but it will. And when it does, you may not have a current program backup, the I/O cards you need may be on a six week lead time and the integrator who built it may not be available. Celtex eliminated risk to your operation. We provide program backups and archiving, fault diagnosis in GX Works2 and GX Developer and we'll give you an honest assessment about time to migration when the moment is right.
MELSERVO MR-J4 / MR-J5
Servo & Motion Control Expertise.
A servo drive that left site on auto tune defaults is a liability. Are you seeing error faults under load, thermal trips at full cycle rate or positioning drift that nobody can explain? Celtex commissions MR-J4 and MR-J5 drives against the actual mechanical load. We perform gain & PID tuning via the machine analyser, SSCNET III/H axis configuration within the iQ-R Motion CPU and electronic cam and gearing verified under real production conditions before handover.
GOT2000 HMI
HMI Interfaces Designed for the Real World.
An HMI that shows every tag in the program isn't "operator visibility". It's a production issue with a touchscreen on it. Celtex builds HMI applications around what the operator actually needs. We make the right information visible at a glance, write alarm management that tells operators what to do rather than what happened and trend displays that make process issues visible before it becomes a problem.
CC-Link IE Field & CC-Link IE TSN
Communications Network Design.
CC-Link IE Field network faults have specific failure modes that aren't obvious from the error codes alone. Station number conflicts, cyclic transmission timeouts and cable topology errors that appear as intermittent communication losses under load. Celtex diagnoses CC-Link IE faults at the network level and commissions new CC-Link IE Field and TSN installations with the configuration discipline that prevents those faults from happening in the first place.
SCADA & Data Integration
Mitsubishi Systems Integrators.
If your Mitsubishi system is running in isolation with no SCADA, no historian and no way to see what the process did three shifts ago, you're making maintenance and production decisions without the data to support them. Celtex integrates iQ-R and iQ-F systems to your plant wide data infrastructure via OPC UA and Modbus TCP, making Mitsubishi systems visible alongside Allen-Bradley, Beckhoff, and Schneider hardware on the same network.
Programming & commissioning environments
GX Works3
We deliver iQ-R and iQ-F automation programming. Capability within all IEC 61131-3 languages, multi-CPU configuration, and safety task development to support your process.
Legacy Programs
Q series and legacy platform support. Program backups, recovery, and modifications in the original software environment.
GT Designer3
GOT2000 HMI application development. GUI & display layout, alarm configuration, recipe management, and accurate trending for data rich decision making.
MR Configurator2
We offer MELSERVO MR-J4 and MR-J5 design & commissioning. Gain tuning, machine analyser expertise, and SSCNET III/H axis parameter setup.
Running a Mitsubishi platform not listed here? Whether you need a system built, a fault diagnosed, or a Q series program recovered before a processor failure forces your hand, call 825.488.6951. We can handle it all.
Contact →OEM Machine Builders
If Mitsubishi is your standard machine platform, Celtex delivers electrical and controls engineering scope to your specification.Sstructured GX Works3 programs, GOT2000 HMI, MR-J5 servo commissioning, and complete documentation your end customers can support independently.
Call Us Below.
825.488.6951
Applications
Where Celtex Delivers Results on Mitsubishi Hardware
The application type shapes what good commissioning looks like. Here’s where our Mitsubishi work makes the most tangible difference to the facilities we serve.
Multi-axis servo coordination
Servo systems usually have a configuration problem, not a hardware problem.
If your machine is running coordinated axes, electronic cam, flying shear or a synchronised winding setup and it’s been underperforming since commissioning, the cause is almost always in the motion configuration. Celtex commissions SSCNET III/H multi axis systems properly. Axis synchronisation is verified under load, cam profiles tested at production speed and fault recovery sequences will be designed that don’t require a manual restart every time something trips.
Packaging machinery
Commissioning to the basics is not enough to guarantee reliability.
Packaging lines running Mitsubishi motion hardware that isn’t performing to rated speed, dropping registration, or requiring constant operator intervention have usually been commissioned to a point where the basics work. Not to the point where the machine performs the way it was specified. Celtex closes that gap. MR-J5 servo tuning, Motion CPU cam configuration, and GOT2000 operator interface development. For lines that need to run hard, every shift.
Automotive & Tier 1
Zero tolerance for unplanned stops. And a controls partner who understands that.
Press automation, welding cells, and transfer lines running Mitsubishi iQ-R hardware in your facility have zero tolerance for unplanned stops. If you need a controls partner who can diagnose an iQ-R fault, modify a GX Works3 program, or commission a new safety CPU without a learning curve at your expense, that’s exactly what Celtex delivers.
Process control
Are you seeing nuisance alarms, setpoint drift, or communication problems?
An iQ-R process CPU managing a large I/O count, multiple PID loops, and SCADA connectivity is a capable system when it’s been configured correctly. If your installation is generating nuisance alarms, drifting on setpoints, or dropping CC-Link IE devices intermittently, Celtex has the experience on hand to diagnose and resolve those issues at the source.