Calgary Omron Programmers
Omron Controls Programming
Industrial automation via Omron controllers — from new model NX and NJ Sysmac platform installations through legacy CJ and CS series support. NA series opertor terminal HMI development and migration planning or system integrations for facilities running Omron hardware that has reached end of life vendor support.
Omron PLC and HMI in Calgary
Omron Expertise That Goes Beyond the Manual
When your production line goes down, you don’t need someone who’s going to learn your control system at your expense. You need an integrator who already knows Omron’s Sysmac hardware, who understands the CX-Programmer environment your legacy hardware runs on, and who can diagnose a fault online, under pressure, without needing the original programmer’s notes to do it.
Celtex brings that depth to every Omron engagement. New Sysmac installations programmed with enough structure that your maintenance team can work on them independently. Legacy CJ and CS systems supported with enough technical knowledge that a missing manual isn’t a barrier to getting you back in production. And when the time comes to migrate we provide a meticulously designed plan that protects your production output, not just your hardware.
Omron NX & NJ
Current Sysmac platforms integrated through new builds & expansions.
Meticulous principles based programming for turnkey systems that work. Efficiently, the first time.
Legacy PLC - CJ & CS
Legacy Omron platform support, repairs & migration.
We modify, troubleshoot & integrate Omron PLC systems across all programming iterations and all equipment types.
Rapid On-Site Response
Based in Calgary, serving all surrounding areas with fast 24/7 emergency response to all of your process control needs.
What We Do
Get Your System Running Faster.
Rapid fault diagnosis and troubleshooting for Omron systems in production. Sysmac Studio online monitoring, CX-Programmer logic tracing, and I/O analysis to find the problem and resolve it, fast.
We won’t just tell you what the problem is, we deliver direct and actionable solutions.
New Installations Done Right.
Full NX and NJ Sysmac system installation, programming and commissioning.
EtherCAT I/O configuration, motion axis setup, HMI integration, and acceptance testing that confirms the system performs to specification before we leave site with full documentation.
Programming Your Team Can Maintain.
PLC and HMI application development built to rigorous standards.
Structured Sysmac Studio code with consistent naming, function block libraries, and documentation your in-house maintenance team can navigate without calling us back for every modification.
Legacy System Support.
CJ2, CJ1, CS1, and CP series support from integrators who know the platforms.
Program backup and recovery, fault diagnosis, I/O unit sourcing guidance, and system modifications that keep your existing systems in production longer.
Omron Automation Support in Calgary
We Know Omron Inside-Out.
NX Series / Sysmac
NX1P2 and NX102 machine controllers with EtherCAT I/O, integrated NX Safety tasks, and motion axis configuration in Sysmac Studio. High performance machine control with integrated safety.
NJ Series / Sysmac
NJ301 and NJ501 automation controllers. EtherCAT motion, EtherNet/IP device connectivity and SQL database integration for production data logging without a separate historian server.
CJ2 / CJ1 Series PLC
The most widely installed Omron platform in Western Canadian manufacturing. CX-Programmer support, DeviceNet and EtherNet/IP network diagnosis. Program recovery for systems where documentation has been lost.
CS1 Series
Large scale legacy PLC still running critical production in Alberta facilities. CX-Programmer logic support, SYSMAC LINK and Controller Link network diagnosis and crystal clear migration planning when the time is right.
NA & NB Series HMI
Sysmac Studio NA5 operator terminals and NB Designer panel configuration. Alarm management, recipe handling, and trend displays that give your operators the visibility they need to run the process confidently.
Accurax G5 / 1S Servo
Sysmac integrated servo drives via EtherCAT comms. Multi-axis synchronised motion, electronic cam and gearing and drive integrated safety for demanding machine control applications.
Don't wait for a failure to find out how exposed you are.
If your facility is running Omron CJ or CS series hardware in a critical production role, the obsolescence clock is ticking. Replacement processor cards and I/O units are getting harder to source every year. The CX-Programmer environment has no active development roadmap. And when a major failure eventually happens (and it will) the cost of an unplanned emergency replacement will be orders of magnitude higher than a planned, managed migration.
Celtex can help you understand exactly where your risk sits and what a controlled migration would look like without pressuring you into a project before you’re ready.
Know Your Risk.
We can provide a straightforward assessment of your CJ or CS system’s exposure to obsolensence. Determine parts availability, failure consequence, and a realistic timeline for making a replacement decision.
Plan Ahead.
Migration scopes provided to you and capital budget documentation while you still have time to plan properly. Not after a processor failure forces a rushed replacement that costs more and disrupts your valuable production process.
Execute With Confidence.
When you’re ready to migrate, Celtex executes a managed cutover to Sysmac NX or NJ that protects the continuity of your production. Your team will be trained and confident on the new system before we close the project.
Lets Talk Omron.
Celtex is based in Calgary and responds to client sites across Alberta and Western Canada. Our work is performed under Canadian Electrical Code jurisdiction by a team with direct field experience on the Omron platforms your facility is running today.
What to Expect From Celtex.
1. We Understand Your System Before we Touch it.
Every engagement starts with us learning what you have. Existing programs, I/O configuration, network architecture, and operational context. Changes made to live systems without that foundation cause problems. We don’t skip this step, regardless of how urgent the situation feels.
2. We Tell You What we Find, Plainly.
If there’s a problem we can fix quickly, we’ll fix it. If the issue runs deeper, we’ll tell you what we found, what it means for your operation, and what your options are. All without inflating scope to justify a larger project.
3. We Deliver Work That Holds Up.
You receive new programs structured for maintainability. Commissioning completed to a functional specification, not just “it runs.” Documentation provided that reflects what’s actually installed. We’re not interested in being back on your site in six months for the same problem.
4. We Leave You in a Better Position Than we Found You.
Programs backed up, as-built documentation redlined and a handover package that puts your maintenance team in control of their own system. The goal of every Celtex engagement is for your facility to be less dependent on outside help when we leave. Not more.
Where Omron Expertise makes the Difference.
Food & Beverage
Omron’s CJ and CS platforms have deep roots in food processing across Western Canada. We know the hygienic requirements, the washdown environments, and the production pressure that makes downtime genuinely costly in this sector.
Packaging & Converting
Sysmac’s integrated motion and logic architecture is purpose built for high speed packaging machinery. New machine builds, retrofits, and format changeover optimisation, Omron’s platform performs best when it’s configured by someone who knows it.
OEM Machine Builders
If you’re specifying Omron for your machine platform, Celtex can handle the controls engineering scope. We’ll free up your team to focus on mechanical design while we deliver the software and electrical scope to your specification.
Manufacturing
Assembly lines, material handling, press and forming operations. Wherever an Omron system is the platform in your facility, we can support, modify, expand, or replace it without you having to change what’s working.
Oil & Gas
Omron installations in upstream and midstream oil and gas environments require integrators who understand both the platform and the operational context. There are hazardous area classifications, CEC requirements, and the reality of remote site access.
Not Sure if We’re the
Right Fit?
Tell us what you’re dealing with. The platform, the application, and the problem you’re trying to solve. We’ll give you a straight answer on whether Celtex is the right call, and what working with us would actually look like.